DBS: Vertical Bar Screen

For Pre-treatment of Municipal Wastewater
and Recovery & Solids Processing from Industrial Discharges

Screen Characteristics
  • Screen is composed of bars obstructing the solids present in the effluent.
  • Cleaning of the screen is achieved by means of 2 rakes with teeth moved by 2 chains.
  • Translation speed of the teeth: 5÷6 m/min.
  • Inclination of the screen compared to the vertical: 15°.
  • Spacing from 12 up to 60 mm.
  • Frame is made with metal plates with a thickness of 3‐4 mm.
  • Gear‐motor shaft and crowns are manufactured in micro alloy steel.
  • Translation chains type rollers chains are manufactured in stainless steel AISI 304 or AISI 316.
  • Cleaning system is made in stainless steel AISI304 or AISI 316. The cleaning system crawls on the upper surface of the rake, causing the removal of the screenings conveyed from the same rake.
  • Discharge chute: the discharge chute is manufactured in stainless steel AISI 304 or AISI 316.
DBS Flow-Diagram
DBS Specifications
screen type Vertical Bar Screen
Model MNT
Bar Spacing:>/td> 12-60mm
Power Installed 0.55-1.5 kW
Power Installed 0.55-1.5 kW
Min. Channel Width 400mm
Max. Channel Width 3000mm
Min. Channel Height 750mm
Max. Channel Height 7500mm
Max. Flow 10,000 l/s
Washing Water Not Required
DBS